Kiowa Router ADSL 2/2+ Wireless 125 + switch 4 porte
Di seguito sono riportate le caratteristiche tecniche rilasciate dalla casa:
GENERAL
- Full-rate ANSI T1.413 Issue 2, ITU-T (G.992.1/2/3/4/5) and READSL2 standard compliant
- Maximum Downstream rate of 24 Mbps
- Maximum Upstream rate of 1 Mbps
- Support Firewall functionality
- Support UPnP ( Universal Plug-and-Play ) specification.
- Hardware reset button
- Support Dying Gasp
- LEDs indicator indicates connection status
- Web-based setup for installation and management
- Firmware upgradable via software
ATM Protocols
- ATM ALL0, ALL2 & ALL5
- ATM UBR, CBR and VBR-nt Traffic Shaping QoS
- OAM F4/F5 Loop Back
- Support up to 16PVCs.
BRIDGE MODE
- Transparent Bridging (IEEE 802.1D)
- RFC 2684/1483 Bridged
ROUTER Mode
- RFC 2684/1483 Routed
- PPP over ATM (RFC 2364)
- PPP over Ethernet (RFC 2516)
- Classical IP over ATM (RFC 1577/2225)
- IP Routing – RIPv1 and RIPv2 and Static Routing
- DHCP Server, Relay and Client
- Support NAT/NAPT with extensive ALG support
- DNS Relay/Server
- Support DMZ funcionality
- Support VPN Pass-Through
FIREWALL
- Statefull Packet Inspection (SPI)
- DoS (Denial of Service) protection
- Packet Filtering
- Protection against IP and MAC address spoofing
- IPSec Pass-Through
ETHERNET Interface
- Built in 4*10/100 Mbps Switch port for LAN connection.
- Compliant with IEEE 802.3/802.3u and auto-negotiation.
- Support full-duplex 802.3 flow control.
- Support up to 4096 MAC learning address
WIRELESS Interface
- IEEE 802.11b/g standards compliant
- Support data rates up to 54Mbps (Auto-rate)
- Support OFDM and DSSS modulation
- Conforms to Wi-Fi standard
- Support WEP/WPA/802.1x/TKIP for data security
- TI 4x technology to reach 125Mbps